B-stock ifm Electronic pressure sensor PQ3809 -100 kPa to 100 kPa M8 industrial sensors

Technical data

• Analog output current [mA]: 4...20
• Response time [ms]: < 6
• Number of analog outputs: 1
• Number of digital outputs: 1
• Number of inputs and outputs: Number of digital outputs: 1; Number of analog outputs: 1
• Display: Display unit: 4 x green LEDs; Switching status: 1 x yellow LED; Function display: 4-digit alphanumeric display; Measured values: 4-digit alphanumeric display
• Display unit: bar; kPa; psi; inHg
• Compressive strength [psi]: 290
• IO-Link Revision: 1.1
• Characteristic curve deviation: < ± 0.25 (BFSL) / < ± 0.5 (LS); (BFSL = Best Fit Straight Line (smallest value setting); LS = limit point setting)
• Switching point accuracy range: < ± 0.5
• SDCI standard: IEC 61131-9 FDIS
• Transmission type IO-Link: COM2 (38.4 kBaud)
• Ambient temperature-1 [°C]: 0...70
• Repeatability percentage range: < ± 0.1; (for temperature fluctuations < 10 K)
• Application: for industrial use
• Short-circuit protection design: pulsed
• Output function: Normally closed / Normally open; (configurable)
• Output signal: Switching signal; Analog signal; IO-Link; (configurable)
• Conditionally usable for: other media on request
• Required master port class: A
• Ready delay time [s]: 0.5
• Special feature: Gold-plated contacts
• Operating voltage [V]: 18...32 DC; (according to SEL/PEL)
• Continuous current rating of the switching output DC [mA]: 100
• Type of pressure: Relative pressure; Differential pressure; Vacuum
• Compressive strength [bar]: 20
• Compressive strength [inHg]: 591
• Compressive strength [kPa]: 2000
• Pressure Equipment Directive: Good Engineering Practice; suitable for fluids of fluid group 2; fluids of fluid group 1 on request
• Adjustable delay time dS, dr [s]: 0; 0.002...5
• Electrical version: PNP
• Total number of exits: 2
• Weight [g]: 87,000
• Hysteresis deviation: < ± 0.25
• In increments of [bar]: 0.01
• In steps of [inHg]: 0.3
• In steps of [kPa]: 1
• In increments of [psi]: 0.2
• Communication interface: IO-Link
• Short-circuit protection: yes
• Storage temperature [°C]: -25...85
• Long-term stability: < ± 0.05; (per 6 months)
• Max. load [Ω]: 500
• Maximum voltage drop at DC switching output [V]: 2
• Medium temperature [°C]: 0...60
• Measuring range [bar]: -1...1
• Measuring range [inHg]: -29.4...29.4
• Measuring range [kPa]: -100...100
• Measuring range [mbar]: -1000...1000
• Measuring range [psi]: -14.6...14.6
• Minimum burst pressure [bar]: 30
• Minimum burst pressure [inHg]: 886
• Minimum burst pressure [kPa]: 3000
• Minimum burst pressure [psi]: 435
• Minimum print cycles: 50 million
• Min. insulation resistance [MΩ]: 100; (500VDC)
• Minimum process cycle time [ms]: 2.3
• MTTF: 437
• Parameterization options: Hysteresis / Window; Normally closed / Normally open; Analog output; IO-Link; Switching logic; Pull-in/drop-out delay; Damping; Display unit
• Profiles: Smart Sensor: Process Data Variable; Device identification
• Process connection: Threaded connection G 1/8 internal thread; Internal thread: M5
• Analog process data: 1
• Process data in binary format: 2
• Reset point rP [bar]: -0.99...0.99
• Reset point rP [inHg]: -29.1...29.1
• Switch-back point rP [kPa]: -99...99
• Reset point rP [psi]: -14.4...14.4
• Switching frequency DC [Hz]: < 100
• Switching point SP [bar]: -0.98...1
• Switching point SP [inHg]: -28.8...29.4
• Switching point SP [kPa]: -98...100
• Switching point SP [psi]: -14.2...14.6
• Protection class: IP 65
• Protection class: III
• SIO mode: yes
• Step response time analog output [ms]: 6
• Connector: Pin layout: 0060 - Connector: 1 x M8; Coding: A; Contacts: gold-plated
• Current consumption [mA]: < 50
• Temperature coefficient at zero point: 0.2; (0...60 °C)
• Temperature coefficient range: 0.2; (0...60 °C)
• Overvoltage protection: yes; (< 40 V)
• Vacuum resistance [mbar]: -1000
• Reverse polarity protection: yes
• Watchdog integrated: yes
• Materials in contact with the medium: Brass; FKM; Silicon (coated); PBT

type

PQ3809

Connection

M8

Exits

PNP

Output signal (min.)

4mA

Output signal (max.)

20mA

Interfaces

IO-Link

Measuring range (pressure) (min.)

-100kPa

Measuring range (pressure) (max.)

100kPa

Measuring range (pressure)

-100 kPa to 100 kPa

Minimum operating voltage

18V/DC

Maximum operating voltage.

32V/DC

Operating voltage range

18 - 32 V/DC

Contact type

1 opener

1 closer

Analog

Hose connection

G1/8 IG

M5 IG

Minimum temperature

0°C

Max. temperature

70°C

RoHS compliant

Yes

Contents

1 pc.

Product type

Pressure sensor