B-stock Eltako wireless cord impulse relay switching device impulse switch FSR70 S 230 V RW

Characteristics:

• 1 normally open contact, not potential-free, 10A/250V AC, 230V LED lamps up to 400W, incandescent lamps 2000 watts, CFLs up to 200W
• Standby power consumption only 0.8 watts
• Installation in the 230V mains connection cable of floor and bedside lamps
• 100mm long, 50mm wide and 31mm high
• This radio actuator, acting as a pulse relay, features our most advanced hybrid technology: We have combined wear-free receiving and evaluation electronics with a bistable relay that switches at the zero crossing, thus eliminating coil power loss and heat generation even when switched on.
• The rotary switch on the side allows up to 35 wireless pushbuttons to be assigned in the LRN positions, including one or more central control pushbuttons.
• Additionally, a wireless motion/brightness sensor for underfloor heating and/or a wireless outdoor brightness sensor for presence simulation.
• The desired function of this impulse relay is then selected: ES = Impulse switch: With FBH programmed, it switches on upon movement; with FAH programmed in, it switches on at dusk; and when no further movement is detected, the contact opens after a 4-minute delay.
• A wireless button can be additionally programmed to activate or deactivate a presence simulation.
• ER=Switching relay: With a learned FAH (front-end load), it switches on at dusk and opens with a 4-minute delay when it's bright.
• AS = Attendance Simulation: The AS begins with a random break time between 20 and 40 minutes, followed by a random on-time between 30 and 120 minutes.
• If the rotary switch is turned to AS, or if the mains voltage is switched on in the AS position, the light switches on for 5 seconds after 1 second.
• With the FAH programmed, the AS only starts at dusk.
• Once the FAH has detected brightness, the AS ends after 4 minutes.
• The LED on the side accompanies the learning process according to the operating instructions and indicates radio control commands during operation by briefly flashing.

EAN/GTIN: 4010312301487

Technical data